Bluesun SG600 Wifi Monitor Micro Solar Inverter Waterproof Inverter 120V 230V 600W With Multiple Protections

Regular price €45,99 EUR
Regular price €159,99 EUR Sale price €45,99 EUR
-€114,00 EUR
Shipping calculated at checkout.
Brand: Bluesun Solar
Availability: 19 in stock
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
Bluesun SG600 Wifi-Monitor Mikro-Solarwechselrichter Wasserdichter Wechselrichter 120 V 230 V 600 W Mit Mehrfachschutz - Bluesun Solar DE
Regular price €45,99 EUR
Regular price €159,99 EUR Sale price €45,99 EUR

01_ce3c5995-c1ac-40cb-af41-18a1f0d1b401

Grid-connected MPPT micro-inverter

700_W

Micro inverters, also known as small inverters, are inverters with a relatively low power. Compared to regular inverters for household or commercial applications, the power of micro-inverters is typically below 1kW, making it more suitable for light-load applications.

5_06537e71-87f4-40e7-8d8f-19e94c43466e

Higher conversion rate

A single inverter is responsible for each unit. Higher conversion efficiency than traditional string inverters! Bring you a higher solar power generation experience

600w-07_66f0a8e2-e43b-4525-82ba-31f9b4e5421d

safer

Traditional centralized inverters or series inverters usually have a DC voltage of a few hundred volts to a few thousand volts, which is easy to catch fire and difficult to extinguish in the event of a fire. Microinverters are only a few tens of volts DC and are fully paralleled, minimizing safety risks to a large extent.

600w-02_7e7148aa-9496-4a15-994c-29a8330daf3e

MPPT tracks the maximum efficiency point

Module-level MPP tracking, no socket effects, reduces the impact of shading on power generation; Good low light performance as the starting voltage is low at only 20V and it works even in low light.

600w-012_c50ffc4f-8045-4049-b2a7-488cd3a686fe

Longer lifetime

The low power of micro-inverters has little impact on the power grid, so they can be easily connected and meet the various needs of power grids.

Normally, the service life of the control cabinet inverter is around 10 years. Microinverters can last up to 25 years

600w-06_6dd16a65-2134-4e21-95f9-5af892fa2ab4

Practical and aesthetic

No dedicated switch room is required, microinverters can be installed directly behind the modules or on the trusses. Because they are connected in parallel, more inverters can easily be added later to increase the size of the installation, without changing the previous configuration.

2_0cfa2c7e-65d8-4984-a367-bca27da4e86c

Intelligent surveillance

A pure sine wave is used. Protect electrical appliances and circuits. With WiFi remote monitoring function, circuit problems can be found at any time

600w-03_800fb285-120f-47dd-adee-57027a4b4581

Intelligent WiFi monitoring

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incident ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

16841340604603201132893638990068_1932b9bc-a988-47cf-862a-243462d6d138

No power cord required. With network cable.

There is no power cord to plug into an outlet. It is sufficient to use the mains connection cable

Product description

05_d7ac566f-342b-48c5-a5b5-ffef81edf5c9

2db70fe3e97d963be1b271f6c9b0486a_50a80bc9-2e02-4804-a191-8d0a11140ec5

6cd435be3d81bb4ff673fbc6c54f3a23_f683ef4d-328a-47fd-b7d5-1710d8226e5c

use scenes

02_ee9d7749-9aa0-4fdc-81f1-1cc7a7cb5bb9

03_d7ee4a6d-74f5-4d4c-a359-a759d027954e

04_2884d8a2-678d-42b3-b377-4d0fc83e94cd

What is MPPT technology?

MPPT is the abbreviation for Maximum Power Point Tracking.

MPPT is the abbreviation for Maximum Power Point Tracking.

MPPT technology is a key technology in photovoltaic solar energy systems. Due to the fact that the output characteristic of photovoltaic modules does not match the input characteristic of the load, the system may not be able to output the maximum power. MPPT technology can track the maximum power point of the photovoltaic modules, allowing the system to achieve maximum power output.

The basic working principle of the MPPT is to seek the maximum power point by converting the output voltage and current of the photovoltaic panels. Common MPPT algorithms are:
1. Incremental conductance: Finding the maximum power point using the "slight perturbation" method.

2. Fit curve method: Creation of a power curve based on the output characteristic of the photovoltaic modules to predict the position of the maximum power point.

3. Equivalent load method: Continuously change the equivalent load of the photovoltaic modules to search for the load point with maximum power output.

4. Humidity Method: Simulating the flow of water downhill to search for the maximum in the direction of increasing power.

5. Neural network: Use of the self-learning and optimization function of neural networks to search for the maximum power point.

The MPPT maximizes system efficiency and has an important impact on system performance. Used in photovoltaic inverters and photovoltaic charge controllers, it is the key to highly efficient energy conversion. Currently, digital-based MPPT algorithms and controllers are widely used in micro-inverters and photovoltaic systems.

In summary, by following the power output curve of photovoltaic modules, MPPT technology optimizes the search for the maximum power point to achieve maximum system output power. It is widely used in micro-inverters and photovoltaic power plants.

Download product information file


product line SG series
Model SG600
Input data (DCPV)
Number of MC4 input connectors 2 sets
MPPT voltage range 28V-55V
operating voltage range 20V-60V
Maximum input voltage 60V
starting voltage 20V
Maximum input power 2*300W
Maximum input current 2*10A
Output data (AC)
Single-phase grid type 120V/230V
rated capacity 590W
Maximum output power 600W
Nominal output current at 120 VAC 4.91A
Nominal output current at 230 VAC 2.56A
Nominal output voltage 120VAC/230VAC
Default output frequency range @120VAC:80V-160V/@230VAC:180V-280V
Nominal output frequency 50Hz/60Hz
Default output frequency range @50Hz:47.5Hz-52.5Hz/@60Hz:57.5Hz-62.5Hz
power factor >0.99
Total harmonic distortion THD<5%
Maximum units per branch at 120 VAC 4 units
Maximum units per branch at 230 VAC 8 units
efficiency
peak efficiency 95%
CEC weighted efficiency @120VAC:92.5%/@230VAC:93.5%
Nominal MPPT efficiency 99.9%
Power consumption at night <700mV
mechanical data
operating ambient temperature range '-40℃-+65℃
storage temperature range '-40℃-+85℃
Dimensions (W x H x D) 185mm*180mm*38.5mm
Weight 1.5kg
Max current of AC bus cable 20A
protective functions IP65
Waterproof grade Natural convection - no fans
cooling mode
Other properties WIFI with cloud monitoring
communication High-frequency transformers, galvanically isolated
transformer design High-frequency transformers, galvanically isolated
Integrated floor Equipment ground is provided by the PE in the AC cable. No additional grounding is required.
protective functions Isolated island protection, voltage protection, frequency protection, temperature protection, current protection, etc.
design conformity CE etc.

Return and Exchange Policy

1. About taxes

Items shipped from Europe. Customers only need to pay VAT on purchases in accordance with EU law. Products shipped to Asia. Customers need to pay the corresponding customs duties. (Tariff is the lowest value) When there is no prompt from Asia on the product page, the default is from Europe. If the customer rejects the package due to customs duties after receiving it, we have the right not to refund. Please pay attention to read the information on the product page before placing an order.

2.About product packaging

Most of our products are in neutral packaging (carton packaging without words and logos), which is the regulation of the express carrier. So it is normal if the package you received is not the same as the color box in the product picture. It is not a resale product. If the express package you received is damaged and the product is damaged as a result. Please take photos and record as soon as possible, and the courier who found the damaged package will issue a delivery damage certificate. Please be sure to complete all of these within five days and contact us via customer service email info@bluesunsolar.net. We will immediately start the after-sales service for you. If it exceeds five days, we will not be able to provide complete after-sales processing of express damage.

3.About damaged packages

If the customer receives a damaged package. The product was damaged because the package was damaged. Please take pictures as soon as possible. Damaged packages will be handed over to DHL to issue a damage certificate. This way we can deal with this issue faster for our clients. Please issue a package damage certificate within five days and contact us through the customer service email. We will resend new products for customers. More than five days may not be so fast

The customer sends the product back without authorization. We have the right to refuse customer service

4. About unconditional return

BLUESUN accepts unconditional returns within 15 days. Within fifteen days after receipt, the customer can choose to return the product unconditionally. All costs of return will be borne by the customer. Orders signed for more than 15 days do not meet the conditions for unconditional return.

5. About defective/suspected defective products

If the customer receives a defective product or suspects that it is a defective product. Please contact our customer service in time. We need customers to provide some test proof materials to judge whether the product is defective. Including but not limited to: photos of test data, photos of products, photos of product barcodes. Only after the customer submits these certification materials, we can provide customers with after-sales service, including refunds, replacements, etc. We need these materials in order to find the production line producing defective products for inspection. To improve the quality of our products.

6. About after-sales of defective products

After the customer submits materials to prove that the product received is indeed defective. We can refund or exchange for customers. Shipping and other charges for replacements are our responsibility.

7.About return refund time.

Returns are sent via DHL. We did not actually receive the returned item when it was shown as signed for. Because our warehouse receives a lot of goods from all over the world every day. So we need to take the time to find the item returned by the customer. After that, there is a return quality inspection. This takes about fifteen days. That is, fifteen days after the receipt of the returned goods. We can refund the customer's payment

8. Limited Peak Performance Warranty

The relevant effective output data can be found on the type plate on the back of the products. Bluesun Solar assures that the actual performance of the products will decrease slightly over 10 years from the date of purchase. Modules are guaranteed as follows: Modules aged from the date of purchase up to 1 year are protected against a performance degradation of more than 2.5% for monocrystalline modules and 2.5% for polycrystalline modules of the nominal value according to the products nameplate under STC conditions. If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this loss of performance. Modules with an age from the date of purchase between 2 and 10 years are protected against an annual performance degradation of more than 0.55% for modules, which means that the “n” year performance for monocrystalline modules is not less than 98%-0, 55% * (n-1) and for polycrystalline modules not less than 98% -0.55% * (n-1) is (2≦n≦25). If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this power loss (if Bluesun Solar deems it necessary). During the warranty period - 10 years - the maximum degradation of the modules must not exceed the value of 18.82% for monocrystalline modules and 18.82% for polycrystalline modules according to the product nameplate under STC conditions. If the deterioration in performance exceeds this - always within the warranty period - provided that this loss of performance is determined by Bluesun Solar and is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions.

 

STC stands for Standard Test Conditions used to measure the performance of solar cells. It includes (a) the light spectrum of AM 1.5, (b) an irradiance of 1,000 W per m2 and © a cell temperature of 25 °C degrees Celsius. Measurements are performed according to IEC 61215 at the junction box terminals according to BluesunSolar's calibration and testing standards (valid at the time of manufacture of the modules).

Once the customer places an order, they agree to these shipping terms. BLUESUN SOLAR DE reserves the right of final interpretation of this clause.

 

 

 

Return and Exchange Policy

1. About taxes

Items are shipped from Europe. Customers only have to pay VAT on purchases under EU law. Products shipped to Asia will require the appropriate customs fee. (The tariffs correspond to the lowest value.) If there are no instructions about customs duties on the product page, the default will be shipped from Europe. If customer refuses the package after receiving it due to customs duty, we reserve the right not to refund. Please be sure to read the information on the product page before ordering.

2. About the product packaging

Most of our products are delivered in neutral packaging (boxes without words and logos), which complies with the regulations of the express service. Therefore, it is normal if the packaging you received does not match the color image on the product page. It is not a product for resale. If the express package you received is broken and it will damage the product. Please take photos as soon as possible and make a note of them and the courier who found the damaged package will issue a proof of delivery for the damage. Please make sure you complete all of this within five days and contact us via customer service email info@bluesunsolar.net. We will start after-sales service for you immediately. If it takes more than five days, we can't afford full after-sales process for compensation.

3. About damaged packages

If the customer receives a damaged package, the product was damaged due to the damage to the package. Please take photos as soon as possible. Damaged packages will be handed over to DHL for issuance of a damage certificate. This way we can solve this problem faster for our customers. Please request a packaging damage certificate within five days and contact us via customer service email. We will send customers new products. More than five days may not last that long.

4. About Unconditional Return

BLUESUN accepts unconditional returns within 15 days. Within fifteen days of receipt, the customer can choose to return the product unconditionally. The customer bears all return costs. Orders signed for more than 15 days ago do not qualify for an unconditional return.

5. About Defective/Suspected Defective Products

If the customer receives a defective product or suspects that the product is defective, please contact our customer service in time. We need some test evidence from customers to judge if the product is defective. This includes, but is not limited to: photos of test data, photos of products, photos of product barcodes. Only after the customer provides these evidence materials can we provide customers with after-sales service, including refund, exchange, etc. We need these materials to find the production line to produce defective products. To improve the quality of our products.

6. About the after-sales service for defective products

After the customer provides materials to prove that the product received is indeed defective, we can issue a refund or exchange for customers. Shipping and other charges for replacement parts are our responsibility.

7. About Refund Duration.

Returns are made via DHL. We actually did not receive the returned product when it showed as signed. Due to the fact that our warehouse receives many goods from all over the world every day, it takes us time to find the product returned by the customer. A quality check of the return is then carried out. This takes about fifteen days, that is, fifteen days after receipt of the returned goods. We can refund customer's payment.

8. Limited Peak Performance Warranty

The relevant effective output data can be found on the type plate on the back of the products. Bluesun Solar assures that the actual performance of the products will decrease slightly over 10 years from the date of purchase. Modules are guaranteed as follows: Modules aged from the date of purchase up to 1 year are protected against a performance degradation of more than 2.5% for monocrystalline modules and 2.5% for polycrystalline modules of the nominal value according to the products nameplate under STC conditions. If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this loss of performance. Modules with an age from the date of purchase between 2 and 10 years are protected against an annual performance degradation of more than 0.55% for modules, which means that the “n” year performance for monocrystalline modules is not less than 98%-0, 55% * (n-1) and for polycrystalline modules not less than 98% -0.55% * (n-1) is (2≦n≦25). If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this power loss (if Bluesun Solar deems it necessary). During the warranty period - 10 years - the maximum degradation of the modules must not exceed the value of 18.82% for monocrystalline modules and 18.82% for polycrystalline modules according to the product nameplate under STC conditions. If the deterioration in performance exceeds this - always within the warranty period - provided that this loss of performance is determined by Bluesun Solar and is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions.

 

STC stands for Standard Test Conditions used to measure the performance of solar cells. It includes (a) the light spectrum of AM 1.5, (b) an irradiance of 1,000 W per m2 and © a cell temperature of 25 °C degrees Celsius. Measurements are performed according to IEC 61215 at the junction box terminals according to BluesunSolar's calibration and testing standards (valid at the time of manufacture of the modules).

As soon as the customer places an order, he agrees to these shipping conditions. BLUESUN SOLAR DE reserves the right of final interpretation of this clause.

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Stephan Willrodt
Für den Preis ist er super!

Also er macht seine Sache gut! Er wird zwar sehr heiß und auch die 600W habe ich nicht herausbekommen, aber für 95Euro ist er echt gut!
Leider hat er kein VDE Ar 4105 Zertifikat oder ich habe dies nicht gefunden!?
Super wäre wenn man einen AC Stecker gleich dazugeben könnte. Dieser ist nach Meinung wichtig, damit man nicht gleich die aufgeschweißten Stecker abschneiden muss .

T
T.L
SG600

Sehr kostengünstiges Produkt, viel günstiger als Amazon! Aber es scheint keinen Stecker zu haben. Muss selbst eine Verbindung zu meinem Verteilerkasten herstellen.Aber es hat meine Erwartungen weit übertroffen!!

C
Chris
Ordentlich Power - gute Verarbeitung - 2 Solarmodule parallel ansteckbar.

Ich hab das Teil auf Empfehlung gekauft, dass SG600 wirklich Spitze ist. Und genau das stimmt! Super Verarbeitung mit 2 parallel verwendbaren Solarmodulen.

Also ich hab nun 2 Solarmodule in Reihe geschaltet. Die gehen links von Mikro Inverter weg. Dann ergänze ich noch eines und das geht rechts vom Inverter weg. Natürlich könnte ich auch ein 3. Modul in Serie schalten, jedoch brauche ich dann ein ganz langes Verlängerungskabel für Modul zurück zum Inverter. So passt es von der Anordnung super. Und mit 3 Module je 170W ist dann auch die Kapazität erschöpft.

Bei der Steckdose für den Eingang nehme ich dann eine Smart-Meßsteckdose und sehe, was gesamt an Strom eingespeist wird. Möge die Sonne scheinen :).

J
Jürgen F
Toller Wechselrichter mit Wlan

Sehr gut für Balkonkraftwerk geeignet

M
Mathias Jamrat
SG600

Hab es angeschlossen und alles funktioniert bis jetzt einwandfrei, ein Langzeittest steht noch aus.