BLUESUN GMI300 300W 230V MPPT Grid Tie Micro Inverter 18-50V Solar Input AC 180-280V Output

Regular price €22,99 EUR
Regular price €80,00 EUR Sale price €22,99 EUR
-€57,01 EUR
Shipping calculated at checkout.
Brand: Bluesun Solar
Availability: 38 in stock
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
BLUESUN GMI300 300W 230V MPPT Netzgekoppelter Mikro-Wechselrichter 18-50V Solarer Eingang AC 180-280V Output - Bluesun Solar DE
Regular price €22,99 EUR
Regular price €80,00 EUR Sale price €22,99 EUR

4_e9f0b367-8977-4b4d-bc75-e43e40a2b674

Grid-connected MPPT micro-inverter

1_3005bee5-3820-450e-8780-7570f3910327

Micro inverters, also known as small inverters, are inverters with a relatively low power. Compared to regular inverters for household or commercial applications, the power of micro-inverters is typically below 1kW, making it more suitable for light-load applications.

5_c9bc8ca2-4ee6-404a-a0ab-2e47788fb83e

Higher conversion rate

A single inverter is responsible for each unit. Higher conversion efficiency than traditional string inverters! Bring you a higher solar power generation experience

5_31621605-6327-4421-b5cc-714c7091de6c

safer

Traditional centralized inverters or series inverters usually have a DC voltage of a few hundred volts to a few thousand volts, which is easy to catch fire and difficult to extinguish in the event of a fire. Microinverters are only a few tens of volts DC and are fully paralleled, minimizing safety risks to a large extent.

3_081a6046-cac5-494a-b083-49843aa21406

MPPT tracks the maximum efficiency point

Module-level MPP tracking, no socket effects, reduces the impact of shading on power generation; Good low light performance as the starting voltage is low at only 20V and it works even in low light.

8_fde28283-8b4f-4e58-86bc-3c7b302e2318

Longer lifetime

The low power of micro-inverters has little impact on the power grid, so they can be easily connected and meet the various needs of power grids.

Normally, the service life of the control cabinet inverter is around 10 years. Microinverters can last up to 25 years
4_32c1c4cd-84d4-4d58-b554-d356ba018822

Practical and aesthetic

No dedicated switch room is required, microinverters can be installed directly behind the modules or on the trusses. Because they are connected in parallel, more inverters can easily be added later to increase the size of the installation, without changing the previous configuration.


Gift socket interface, plug and play. Easy to install
2_0563df59-1574-4b12-8ef6-c9432ea23589

use scenes

1_a46381e2-06c6-4f43-91ce-7c145ea84b2a

2_89b5b676-a708-4cae-ae3e-702707e31078

3_8b1635ef-b4d8-476a-9d81-74f583232f9b

Product description

6_29d050f1-853c-4e2b-9bb1-dd706d6b1456

7_e727668e-64ee-45ef-a5af-45e5331280ea

What Is MPPT Technology?

MPPT is the abbreviation for Maximum Power Point Tracking.

MPPT is the abbreviation for Maximum Power Point Tracking.
MPPT technology is a key technology in photovoltaic solar energy systems. Due to the fact that the output characteristic of photovoltaic modules does not match the input characteristic of the load, the system may not be able to output the maximum power. MPPT technology can track the maximum power point of the photovoltaic modules, allowing the system to achieve maximum power output.

The basic working principle of the MPPT is to seek the maximum power point by converting the output voltage and current of the photovoltaic panels. Common MPPT algorithms are:
1. Incremental conductance: Finding the maximum power point using the "slight perturbation" method.

2. Fit curve method: Creation of a power curve based on the output characteristic of the photovoltaic modules to predict the position of the maximum power point.

3. Equivalent load method: Continuously change the equivalent load of the photovoltaic modules to search for the load point with maximum power output.

4. Humidity Method: Simulating the flow of water downhill to search for the maximum in the direction of increasing power.

5. Neural network: Use of the self-learning and optimization function of neural networks to search for the maximum power point.

The MPPT maximizes system efficiency and has an important impact on system performance. Used in photovoltaic inverters and photovoltaic charge controllers, it is the key to highly efficient energy conversion. Currently, digital-based MPPT algorithms and controllers are widely used in micro-inverters and photovoltaic systems.

In summary, by following the power output curve of photovoltaic modules, MPPT technology optimizes the search for the maximum power point to achieve maximum system output power. It is widely used in micro-inverters and photovoltaic power plants.

Download product information file


Model GMI300
Input data (DC, PV)
Number of MC4 input connectors 1 sentence
MPPT voltage range 24V-40V
operating voltage range 18-50V
Maximum input voltage 50V
starting voltage 18V
Maximum input power 300W
Maximum input current 12A
Output data (AC)
Single-phase grid type 120V/230V
rated capacity 280W
Maximum output power 300W
Nominal output current 120V:2.33A/230V:1.21A
Nominal output voltage 120VAC/230VAC
Standard output voltage range @120VAC:80V-160V @230VAC :180V-280V
Nominal output frequency 50Hz/60Hz
Default output frequency range @50Hz : 47.5Hz-52.5Hz /@60H:57.5HZ-62.5Hz
power factor >0.99
Total harmonic distortion THD<5%
efficiency
peak efficiency 92.5%
CEC weighted efficiency @120VAC : 90.5% @230VAC:91.5%
Nominal MPPT efficiency 99.9%
Power consumption at night 700
mechanical data
operating ambient temperature range -40°C to +65°C
storage temperature range -40C to +85°C
Dimensions (W x H x D) 35mm x 76mm x 233mm
Weight 0.5kg
Waterproof grade IP55
cooling mode Natural convection - no fans
Other properties
transformer design High-frequency transformers, galvanically isolated
Integrated floor Equipment ground is provided by the PE in the AC cable. No additional grounding is required.
protective functions Isolated island protection, voltage protection, frequency protection, temperature protection, current protection, etc.


Return and Exchange Policy

1. About taxes

Items shipped from Europe. Customers only need to pay VAT on purchases in accordance with EU law. Products shipped to Asia. Customers need to pay the corresponding customs duties. (Tariff is the lowest value) When there is no prompt from Asia on the product page, the default is from Europe. If the customer rejects the package due to customs duties after receiving it, we have the right not to refund. Please pay attention to read the information on the product page before placing an order.

2.About product packaging

Most of our products are in neutral packaging (carton packaging without words and logos), which is the regulation of the express carrier. So it is normal if the package you received is not the same as the color box in the product picture. It is not a resale product. If the express package you received is damaged and the product is damaged as a result. Please take photos and record as soon as possible, and the courier who found the damaged package will issue a delivery damage certificate. Please be sure to complete all of these within five days and contact us via customer service email info@bluesunsolar.net. We will immediately start the after-sales service for you. If it exceeds five days, we will not be able to provide complete after-sales processing of express damage.

3.About damaged packages

If the customer receives a damaged package. The product was damaged because the package was damaged. Please take pictures as soon as possible. Damaged packages will be handed over to DHL to issue a damage certificate. This way we can deal with this issue faster for our clients. Please issue a package damage certificate within five days and contact us through the customer service email. We will resend new products for customers. More than five days may not be so fast

The customer sends the product back without authorization. We have the right to refuse customer service

4. About unconditional return

BLUESUN accepts unconditional returns within 15 days. Within fifteen days after receipt, the customer can choose to return the product unconditionally. All costs of return will be borne by the customer. Orders signed for more than 15 days do not meet the conditions for unconditional return.

5. About defective/suspected defective products

If the customer receives a defective product or suspects that it is a defective product. Please contact our customer service in time. We need customers to provide some test proof materials to judge whether the product is defective. Including but not limited to: photos of test data, photos of products, photos of product barcodes. Only after the customer submits these certification materials, we can provide customers with after-sales service, including refunds, replacements, etc. We need these materials in order to find the production line producing defective products for inspection. To improve the quality of our products.

6. About after-sales of defective products

After the customer submits materials to prove that the product received is indeed defective. We can refund or exchange for customers. Shipping and other charges for replacements are our responsibility.

7.About return refund time.

Returns are sent via DHL. We did not actually receive the returned item when it was shown as signed for. Because our warehouse receives a lot of goods from all over the world every day. So we need to take the time to find the item returned by the customer. After that, there is a return quality inspection. This takes about fifteen days. That is, fifteen days after the receipt of the returned goods. We can refund the customer's payment

8. Limited Peak Performance Warranty

The relevant effective output data can be found on the type plate on the back of the products. Bluesun Solar assures that the actual performance of the products will decrease slightly over 10 years from the date of purchase. Modules are guaranteed as follows: Modules aged from the date of purchase up to 1 year are protected against a performance degradation of more than 2.5% for monocrystalline modules and 2.5% for polycrystalline modules of the nominal value according to the products nameplate under STC conditions. If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this loss of performance. Modules with an age from the date of purchase between 2 and 10 years are protected against an annual performance degradation of more than 0.55% for modules, which means that the “n” year performance for monocrystalline modules is not less than 98%-0, 55% * (n-1) and for polycrystalline modules not less than 98% -0.55% * (n-1) is (2≦n≦25). If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this power loss (if Bluesun Solar deems it necessary). During the warranty period - 10 years - the maximum degradation of the modules must not exceed the value of 18.82% for monocrystalline modules and 18.82% for polycrystalline modules according to the product nameplate under STC conditions. If the deterioration in performance exceeds this - always within the warranty period - provided that this loss of performance is determined by Bluesun Solar and is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions.

 

STC stands for Standard Test Conditions used to measure the performance of solar cells. It includes (a) the light spectrum of AM 1.5, (b) an irradiance of 1,000 W per m2 and © a cell temperature of 25 °C degrees Celsius. Measurements are performed according to IEC 61215 at the junction box terminals according to BluesunSolar's calibration and testing standards (valid at the time of manufacture of the modules).

Once the customer places an order, they agree to these shipping terms. BLUESUN SOLAR DE reserves the right of final interpretation of this clause.

 

 

 

Return and Exchange Policy

1. About taxes

Items are shipped from Europe. Customers only have to pay VAT on purchases under EU law. Products shipped to Asia will require the appropriate customs fee. (The tariffs correspond to the lowest value.) If there are no instructions about customs duties on the product page, the default will be shipped from Europe. If customer refuses the package after receiving it due to customs duty, we reserve the right not to refund. Please be sure to read the information on the product page before ordering.

2. About the product packaging

Most of our products are delivered in neutral packaging (boxes without words and logos), which complies with the regulations of the express service. Therefore, it is normal if the packaging you received does not match the color image on the product page. It is not a product for resale. If the express package you received is broken and it will damage the product. Please take photos as soon as possible and make a note of them and the courier who found the damaged package will issue a proof of delivery for the damage. Please make sure you complete all of this within five days and contact us via customer service email info@bluesunsolar.net. We will start after-sales service for you immediately. If it takes more than five days, we can't afford full after-sales process for compensation.

3. About damaged packages

If the customer receives a damaged package, the product was damaged due to the damage to the package. Please take photos as soon as possible. Damaged packages will be handed over to DHL for issuance of a damage certificate. This way we can solve this problem faster for our customers. Please request a packaging damage certificate within five days and contact us via customer service email. We will send customers new products. More than five days may not last that long.

4. About Unconditional Return

BLUESUN accepts unconditional returns within 15 days. Within fifteen days of receipt, the customer can choose to return the product unconditionally. The customer bears all return costs. Orders signed for more than 15 days ago do not qualify for an unconditional return.

5. About Defective/Suspected Defective Products

If the customer receives a defective product or suspects that the product is defective, please contact our customer service in time. We need some test evidence from customers to judge if the product is defective. This includes, but is not limited to: photos of test data, photos of products, photos of product barcodes. Only after the customer provides these evidence materials can we provide customers with after-sales service, including refund, exchange, etc. We need these materials to find the production line to produce defective products. To improve the quality of our products.

6. About the after-sales service for defective products

After the customer provides materials to prove that the product received is indeed defective, we can issue a refund or exchange for customers. Shipping and other charges for replacement parts are our responsibility.

7. About Refund Duration.

Returns are made via DHL. We actually did not receive the returned product when it showed as signed. Due to the fact that our warehouse receives many goods from all over the world every day, it takes us time to find the product returned by the customer. A quality check of the return is then carried out. This takes about fifteen days, that is, fifteen days after receipt of the returned goods. We can refund customer's payment.

8. Limited Peak Performance Warranty

The relevant effective output data can be found on the type plate on the back of the products. Bluesun Solar assures that the actual performance of the products will decrease slightly over 10 years from the date of purchase. Modules are guaranteed as follows: Modules aged from the date of purchase up to 1 year are protected against a performance degradation of more than 2.5% for monocrystalline modules and 2.5% for polycrystalline modules of the nominal value according to the products nameplate under STC conditions. If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this loss of performance. Modules with an age from the date of purchase between 2 and 10 years are protected against an annual performance degradation of more than 0.55% for modules, which means that the “n” year performance for monocrystalline modules is not less than 98%-0, 55% * (n-1) and for polycrystalline modules not less than 98% -0.55% * (n-1) is (2≦n≦25). If the performance degradation exceeds this and Bluesun Solar determines that this performance loss is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions, Bluesun Solar will, at its option, either repair, replace or provide additional modules to compensate for this power loss (if Bluesun Solar deems it necessary). During the warranty period - 10 years - the maximum degradation of the modules must not exceed the value of 18.82% for monocrystalline modules and 18.82% for polycrystalline modules according to the product nameplate under STC conditions. If the deterioration in performance exceeds this - always within the warranty period - provided that this loss of performance is determined by Bluesun Solar and is not due to defective workmanship of the module when the module has been properly installed and used under normal conditions.

 

STC stands for Standard Test Conditions used to measure the performance of solar cells. It includes (a) the light spectrum of AM 1.5, (b) an irradiance of 1,000 W per m2 and © a cell temperature of 25 °C degrees Celsius. Measurements are performed according to IEC 61215 at the junction box terminals according to BluesunSolar's calibration and testing standards (valid at the time of manufacture of the modules).

As soon as the customer places an order, he agrees to these shipping conditions. BLUESUN SOLAR DE reserves the right of final interpretation of this clause.

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Robert Binder

Aok

S
Super Teil
300W

Super Teil für balkonkraftwerk

U
Ulrich
Solar-Netz-Wechselrichter, 300 W läuft und leistet

Ich war ja erst einmal skeptisch, Weil der Preis so niedrig ist. Niedriger als die der gleichen Spezifikation auf dem Markt aber bislang - das Gerät ist nun 3 Wochen im Einsatz - bin ich wirklich zufrieden.

Die Installation war einfach, die beiliegende Anleitung ist ok. Wie und wo man es am 230V-Netz anschließt sollte man wissen.

Die Kabel könnten insgesamt etwas länger sein, bei der Montage braucht es schon etwas Platz, auch das 230V-Anschlusskabel ist recht kurz. Der Wirkungsgrad scheint zu passen, mit 36V-100W-Zelle zeigt das Wattmeter bei voller Ausleuchtung als 230V Ausgangsleistung 90,8W an, also im Rahmen der Messgenauigkeit wie erwartet.

Ein wenig irritierend war der Wiederanlauf des Wandlers. Wird er vom Netz getrennt, springt er nicht wieder an, bis die Solarzelle einmal getrennt wird. Allerdings hat mich meine Geduld nach 15 Minuten verlassen, möglich dass der Wandler nach längerer Wartezeit oder sonst über Nacht wieder von selbst anspringt. Aber nun, wenn das Gerät läuft muss man ja nicht mehr so oft an die Leitungen heran.

Die Betriebsgeräusche beschränken sich auf ein leises Summen, warm wird der Wandler nicht, bei 100W ist er ja auch noch nicht wirklich ausgelastet. Zumal die Sonne nur selten mehr als 30W bringen wollte. Betriebsdaten liefert das Gerät bis auf die rot-grüne Betriebsanzeige nicht, aber das ist bei dem Preis auch ok.

Alles in allem kann ich das Gerät jedenfalls empfehlen.